4 Inputs for AC/DC 24 V with shared ground (COM-) The data rail must be ordered separately. See chapter System Products and Accessories - Data rails.
Модель: 5WG1261-1AB01Цена:
В корзину
Перейдите в каталог, выберите требуемый товар и добавьте его в корзину.
Или просто Отправьте заявку
Метка — Технология электроустановки.
4 Inputs for AC/DC 24 V with shared ground (COM-) The data rail must be ordered separately. See chapter System Products and Accessories - Data rails.
Модель: 5WG1261-1AB014 Inputs for AC/DC 24 V with shared ground (COM-), UL-Standard The data rail must be ordered separately. See chapter System Products and Accessories - Data rails.
Модель: 5WG1261-1CB01-For connection of a modular bus device to the bus line -10-pole BTI socket (BTI - Bus Transceiver Interface) for plugging of bus terminal devices with BTI connector -For installation in flush-mounting switch and socket boxes with ? 60 mm -Screw fixing -Bus connection via bus terminal
Модель: UP 117/12micro SDHC card and adapters for USB and SD for transferring firmware and configuration data
Модель: S 204/01-Used as passive infrared detector for indoor ceiling installation -Sensing range, horizontal 360 °, vertical approx. 80 ° -For monitoring an area with a diameter of approx. 4 m to approx. 7 m (depending on mounting and room height) -LED on sensor head for display -Used as brightness sensor -Cone–shaped detection area, opening angle 90 ° -Measuring range 20 to 1000 lx -Integrated DALI bus coupling unit for communicating with a central DALI controller -Power supply through DALI line with 5 mA DALI bus load -Plug-in terminals for connecting the DALI line -For installation in suspended ceilings
Модель: 5WG11412AB51-Binary input device -4 inputs to connect installation buttons -Supported actions per input -Short button press -Long button press -Integrated DALI bus coupling unit for communicating with a central DALI controller -Power supply through DALI line with 6 mA DALI bus load -For flush-mounting wall or ceiling outlet installations with a 60 mm diameter and depth of 60 mm -Plug-in terminals for connecting the DALI line -Cable set for connecting pushbuttons
Модель: 5WG11412AB71Electromotive, proportional (constant) valve actuator with LED valve position indication and with integrated bus coupling unit for direct connection to KNX: -For latching to valve adapter -Delivery with valve adapter rings suitable for Siemens (VDN../VEN.., VPD../VPE.., VD...CLC, V..I46.., V..P47..) Danfoss RA, Heimeier, MNG, Schl?sser ab 3/93, Honeywell, Braukmann, Dumser (distribution board), Reich (distribution board), Oventrop, Herb, Onda -Max. positioning force: 120 N -Cable permanently connected to the enclosure for bus connection and two additional signaling contacts (e. g. window contacts), which can be connected as binary inputs -For operation solely with the bus voltage, i. e. without external auxiliary power -Maintenance-free, silent drive -Automatic valve stroke detection, through which the actuator travel is adjusted to the valve used
Модель: AP 562/02Frame for NEMA box. For matching DELTA profil operator interfaces, see Chapter System Products and Accessories –System products. Matching to DELTA style operator interfaces with intermediate frame DELTA Style see Chapter Display and Operation Units – Pushbutton accessories.
Модель: 5WG1240-8CB11-For receiving IR signals transmitted from IR wall-mounted transmitters or IR hand-held transmitters -Conversion of IR signals received from up to 32 IR channels into bus telegrams -Configurable evaluation of the IR signals per IR channel as single button or as button pair -Per IR button selectable functions -Switching on/off/over -Switching on or off at either rising or falling edge -Single button dimming -Single button sun protection control -1-/8-bit scene control -8-/16-bit value -Percentage value -Temperature value -Brightness value -Positively driven operation -Depending on the selected main function -Per IR button selectable additional function executed either after a time delay (time delay configurable from 100 ms to 6550 s) or alternatively on a long button press -Per IR button pair selectable functions -2-button dimming with stop telegram -2-button sun protection control -Transmission variable percentage value -Transmission variable 8-bit value -1-/8-bit scene control -Positively driven operation -Depending on the selected main function: per IR button selectable additional functions -Switching on/off -8-16-bit value -Percentage value -Temperature value -Brightness value -Recall/save 1-bit scene 1 -Recall/save 1-bit scene 2 -Recall 8-bit scene -Positively driven on/off/deactivate -Blocking can selected for each IR button and configured individually -Integrated bus coupling units, Bus connection via bus terminal -Bus-powered electronics -Including clamping spring and rosette for installation in ceilings, walls or lights -For commissioning when mounted, a magnet is required, such as a 5WG1 590-8AH01 programming magnet The programming magnet must be ordered separately.
Модель: S 450/03-6 pushbutton pairs for the remote control of lighting, shutter/blinds and scenes via UP 258E21 or UP 258D11 presence detector -Parameterization is via ETS in the UP 258E21 or UP 258D11 presence detector -Range: approx. 4.5 m -Power supply: CR2025 lithium button cell -Degree of protection (acc. to EN 60529): IP40
Модель: S 255/11-Rated contact voltage 120 V AC -Rated current 20 A for AC 3 usage categories in accordance with EN 60947-4-1
Модель: 5WG1512-1CB01-Integrated 2-step light control, optionally available in fully automatic or semi-automatic version -3 independent control channels each with 2 start objects and 2 end objects
Модель: 5WG12582DB11-Integrated constant light level control and 2-step light control, optionally available in fully automatic or semi-automatic version -4 channels for offset groups
Модель: UP 258E21Programming magnet for S 450 IR receiver decoders The matching IR remote controls and IR wall-mounted transmitters must be ordered separately. See Chapter Display and Operation Units - Remote controls.
Модель: 5WG15908AH01Pushbutton interface: -with 4 inputs / outputs each configurable for potential-free contacts or for control of an LED (max 2 mA) -with integrated bus coupling unit, bus connection via bus terminal -for insertion in flush-mounting switch and socket boxes 60 mm in diameter and 40 mm deep
Модель: UP 220D31-Pushbutton in pair, -Horizontal operation and -Per pushbutton selectable function toggle. -Connectable bus coupling unit (BTM) or fluah-mounted actuators via BTI Bus coupling unit (BTM) / flush mounted actuator and a design frame must be ordered as a separate items.
Модель: UP 222/33-Pushbutton in pair, -Vertical operation -Per pushbutton selectable function toggle. -Connectable bus coupling unit (BTM) or fluah-mounted actuators via BTI Bus coupling unit (BTM) / flush mounted actuator and a design frame must be ordered as a separate items.
Модель: UP 286/43-Pushbutton in pair, -Horizontal operation and -Per pushbutton selectable function toggle. -Connectable bus coupling unit (BTM) or fluah-mounted actuators via BTI Bus coupling unit (BTM) / flush mounted actuator and a design frame must be ordered as a separate items.
Модель: UP 222/13